beyond plastic

BioPHA 3D Printer Filament, Gen 2, Black

$29.99
Size:

PHA is a biopolymer made from natural materials. It looks, feels, and works just like plastic — but unlike other plastics it’s environmentally safe and leaves zero microplastics behind. 


Our Gen 2 PHA filament formula improves mechanical properties so there’s no need to compromise between quality and sustainability. Now makers can get high-quality precision prints that are smooth, consistent, and eco-friendly every time.


Here are the reasons PHA is a great alternative to PLA and other plastic filaments when it comes to 3D printing.

Recyclable, compostable, and biodegradable: Our PHA filament is recyclable, compostable, and biodegradable under all conditions. This means that it can be safely placed in a home compost bin along with food and waste. And even in the worst-case scenario, if it ends up in landfills or our oceans, it will naturally biodegrade. 


Quality Performance: Improved bed and layer adhesion and overhang, while decreasing die swelling, ensuring more accurate and consistent prints.


Easy to use: Clog-free, bubble-free formula with low warpage and shrinkage, guaranteeing smooth prints for every project.



Specifications

Materials: PHA

Diameter:  1.75mm (±0.1mm)

Density: 1.33g/cm3

Glass Transition Temp: -9.3
  • PRODUCT SPECIFICATIONS

    • Nominal Diameter: 1.75 mm
    • Diameter Tolerances: ± 0.1 mm
    • Ovality: Less than 95%
    • Net Weight: 600g/1kg
    • Shore Hardness: 70D

    MATERIAL TECHNICAL DATA SHEET

    Density
    • Value: 1.33 g/mL
    • Standard: Beyond Plastic
    • Condition:

    MFR
    • Value: 10 g/10 min
    • Standard: ASTM D1238
    • Condition: 190 °C/2.16 kg

    Max Breaking Force
    • Value: 712 N
    • Standard: ASTM D638
    • Condition: 1 mm/min

    Elongation at Break
    • Value: 5%
    • Standard: ASTM D638
    • Condition: 1 mm/min

    Young's Modulus
    • Value: 2,137 MPa
    • Standard: ASTM D638
    • Condition: 1 mm/min

    Melting Temperature
    • Value: 170 °C
    • Standard: Beyond Plastic
    • Condition: 10 °C/min

    Glass Transition
    • Value: -9.3 °C
    • Standard: Beyond Plastic
    • Condition: 10 °C/min

    Thermal Degradation
    • Value: 255 °C
    • Standard: Beyond Plastic
    • Condition: 10 °C/min

  • SPOOL DIMENSIONS

    • Spool diameter: 200 mm
    • Spool depth: 58 mm
    • Hub diameter: 83 mm
    • Hub hole diameter: 53 mm

  • RECOMMENDED PRINTER SETUP

    • Extrusion temperature: 195±10
    • Print Fan: On (100% after 1st layer)
    • Bed temperature: off (0°C)
    • Bed Addition: PVOH Glue
    • Brim Width: 10-15mm
    • Brim Separation Gap: 0mm
    • Printing speed: 20~30 mm/s
    • Dryer: Material is hydroscopic but at low percentage (0.03%). Will dry very quickly if necessary.

You may also like

Recently viewed